Search found 55 matches

Hi all,

EJ20 in late bay with rad and scoop between the chassis rails (fans on top).

After initial overheating issues about 8 years ago I bolted an additional intake ramp to the chassis rails in ...

Thanks Wilfred.
I just tried removing the voltage regulator but can't do it without damaging something. I think I may have to replace the complete alternator. Again. Do you have any recommendations ...

Hi all, hope you all had a great Christmas.

I fitted a replacement alternator to my T2 with 1998 EJ20 N/A a few months ago and noticed that the output voltage fluctuated between 14 & 15V. I fit ...

Hi Kai, took the alternator off to clean all the grounds and terminals, but one thing I noticed was that the resistance between the light connector and the alternator body ground was 22kOhms. I can't ...

If the alternator has more than 2 pins and I have only the warning light and ignition wires to connect to it, will the alternator still work with nothing connected to the other pin(s)?

I feared that might be the case. I might well take you up on your offer.
Will it fit a 98 (possibly 99) EJ20 that has only 2 wires in the connector plug?

Thanks.

Right, finally had a bit of time to do a bit more checking. I only have two wires on the alternator (apart from the big red charging wires).
With the ignition off I get 0V on both alternator wires.
...

Thanks Kai,

Mine is conventional bay wiring at the front and conventional EJ20 wiring at the rear so it works the way you describe. It's been working well over the last 2 years or so.

I've now m ...

EJ20 in a bay.
Following a recent issue with my fuel pump not priming, I realised today that my alternator light doesn't come on when I switch the ignition on. I checked the bulb and it was Ok.

I ...

Hi Baydreams. Long time since we last messaged on TLB.

I had similar problems with mine in hot weather even without a trailer. I made up a 2 inch spoiler (angled at around 30 deg) that I hang from ...

Thanks Kai, I managed to get one on EBay. I wanted an original so it would be easy to replace in an emergency.
It all seems to be working OK at the moment.
Thanks again.

Does anyone know where I can get hold of a new EJ20 N/A fuel pump relay?
It's just to keep as a spare but I can't find any on t'internet.
Cheers