wiring problems

slushrush · Force Sensitive Joined: 10 May 2007 Posts: 16

I am in the middle of a conversion to a 2.2 subaru legacy 1990. i have cut the wiring loom down so it is just the wires from the ECU and got to the point where i am ready to start it and it won't go!

Just got a few questions to hopefully point me in the right direction...

We have put B48 2 and 13 to live and B58 12 to ignition. B56 12 says read memory does this need to go to live as i haven't got it connected at the moment?

B56 10 says starter switch, is this the cold start and is it supposed to go to the starter motor?

I managed to find some diagrams for a 2.2 but they are for US spec cars and i'm not sure if these are right for my car, does anyone know where i can get the diagrams for a UK spec 2.2.

gazman · Posted: Mon Jan 05, 2009 8:10 am Post subject:

I've got a pdf here - http://osp.metrohosting.info/wiringgallerysubaru.html
click the one named '92 MPFI'
It's USDM too but it shows where those wires go....
I'll try n dig up a uk spec diagram

_________________
The V6 Lowlight. See the full build here - http://osp.metrohosting.info/kombiv6.html

rjes · Posted: Mon Jan 05, 2009 10:35 pm Post subject:

I hope your phone call was useful today. Sorry - I hadn't seen this thread until after you phoned.
_________________
Regards,

Richard,

R J Engineered Solutions
Quality Subaru Powered VW Components
www.rjes.com

slushrush · Force Sensitive Joined: 10 May 2007 Posts: 16

I haven't got it running yet but it looks like i might be on the right track now!

Thanks for the advice