| View previous topic :: View next topic |
| Author |
Message |
Superleggo Jedi Master

Joined: 12 Nov 2009 Posts: 359 Location: United Kingdom
|
Posted: Fri Dec 11, 2009 12:02 am Post subject: door gaps on 1971 bay |
|
|
ok have I lashed this up? I have just reskinned the doors and fitted them to the camper and they fit well with even door gaps. I have now ust replaced the front wheel arch which seems to fit the door well at the higher section on the door bottom but I have got a 12mm gap at the lower edge at the lower door shut.
As both panels are new, is it meant to be like this or have I lashed it up as it seems wrong? I have fitted the other side and again it seems ok in all areas except the lower edge again. On this side I have not replaced the front wheel arch yet.
Is this right?
 _________________ VW Camper 1971
VW Passat 2006
Lotus Elan +2 Convertible 1967
Lotus Elan +2 1968
Mini Moke 1974
Land Rover Series 2a 1967
DB5 replica Work in progress
Another day another car! |
|
| Back to top |
|
 |
andysamba Padawan


Joined: 09 Aug 2009 Posts: 54 Location: CAMBRIDGE
|
Posted: Fri Dec 11, 2009 1:14 am Post subject: |
|
|
ive had same problem with my bay aswell.
because i changed the arches both sides i left them with the big gaps at bottom.
ive seen loads around with big gaps at the bottom-seems to be the in thing to have at the moment!.
woudnt worry to much.  |
|
| Back to top |
|
 |
richbaker78 Teacher of Padawans


Joined: 31 Jan 2006 Posts: 1298
|
Posted: Fri Dec 11, 2009 10:07 pm Post subject: |
|
|
not your fault the pattern parts are shite. if you look in my build thread you will see I had to cut and shut my pattern arches to get them to fit cos i couldnt live with massive door gaps i could get my fingers in!!!
basically cut it into 4 pieces and aligned with door and welded back together again. Not ideal but neccesary |
|
| Back to top |
|
 |
Superleggo Jedi Master

Joined: 12 Nov 2009 Posts: 359 Location: United Kingdom
|
Posted: Sat Dec 12, 2009 9:02 am Post subject: |
|
|
Thanks for the vote of confidence I thought I was loosing the plot. I think you are right Rich time fot the 9" grinder and take a slice out as I know it will annoy me. _________________ VW Camper 1971
VW Passat 2006
Lotus Elan +2 Convertible 1967
Lotus Elan +2 1968
Mini Moke 1974
Land Rover Series 2a 1967
DB5 replica Work in progress
Another day another car! |
|
| Back to top |
|
 |
Superleggo Jedi Master

Joined: 12 Nov 2009 Posts: 359 Location: United Kingdom
|
Posted: Sat Dec 12, 2009 9:27 pm Post subject: Much better |
|
|
Rich
You are right it is well worth the effort and not too difficult.
sorted the LHS will do the other tomorrow.
 _________________ VW Camper 1971
VW Passat 2006
Lotus Elan +2 Convertible 1967
Lotus Elan +2 1968
Mini Moke 1974
Land Rover Series 2a 1967
DB5 replica Work in progress
Another day another car! |
|
| Back to top |
|
 |
hansend23 Jedi Master


Joined: 04 Mar 2009 Posts: 333 Location: Washington state
|
Posted: Sun Dec 13, 2009 5:27 am Post subject: |
|
|
nice! _________________ just do it! |
|
| Back to top |
|
 |
13 window deluxe Jedi Guardian


Joined: 22 Dec 2006 Posts: 861 Location: chesterfield derbyshire
|
Posted: Sun Dec 13, 2009 11:45 am Post subject: |
|
|
had to do same with my split os arch fitted like original ns arch i could get my fingers in to the cab at the bottom edge without opening the door so i cut about 10-15mm out of the arch in the middle and it fitted ace then  _________________ 1964 rat 13 window deluxe 1Z tdi,
1975 rhd twin slider tintop (TBA)
1991 golf 2 gti with tweaked AHU tdi,
previous tdi swaps: gone but not forgotten
1979 rhd twin slider tintop bay ahu 1.9tdi
1990 T25 1Z 1.9tdi
1993 suzuki samurai with 1Z 1.9tdi |
|
| Back to top |
|
 |
|